|
|
|
|
@ -0,0 +1,707 @@
|
|
|
|
|
### The following directives do not change with server reload.
|
|
|
|
|
|
|
|
|
|
# User authentication method. To require multiple methods to be
|
|
|
|
|
# used for the user to login, add multiple auth directives. The values
|
|
|
|
|
# in the 'auth' directive are AND composed (if multiple all must
|
|
|
|
|
# succeed).
|
|
|
|
|
# Available options: certificate, plain, pam, radius, gssapi.
|
|
|
|
|
# Note that authentication methods utilizing passwords cannot be
|
|
|
|
|
# combined (e.g., the plain, pam or radius methods).
|
|
|
|
|
|
|
|
|
|
# certificate:
|
|
|
|
|
# This indicates that all connecting users must present a certificate.
|
|
|
|
|
# The username and user group will be then extracted from it (see
|
|
|
|
|
# cert-user-oid and cert-group-oid). The certificate to be accepted
|
|
|
|
|
# it must be signed by the CA certificate as specified in 'ca-cert' and
|
|
|
|
|
# it must not be listed in the CRL, as specified by the 'crl' option.
|
|
|
|
|
#
|
|
|
|
|
# pam[gid-min=1000]:
|
|
|
|
|
# This enabled PAM authentication of the user. The gid-min option is used
|
|
|
|
|
# by auto-select-group option, in order to select the minimum valid group ID.
|
|
|
|
|
#
|
|
|
|
|
# plain[passwd=/etc/ocserv/ocpasswd,otp=/etc/ocserv/users.otp]
|
|
|
|
|
# The plain option requires specifying a password file which contains
|
|
|
|
|
# entries of the following format.
|
|
|
|
|
# "username:groupname1,groupname2:encoded-password"
|
|
|
|
|
# One entry must be listed per line, and 'ocpasswd' should be used
|
|
|
|
|
# to generate password entries. The 'otp' suboption allows one to specify
|
|
|
|
|
# an oath password file to be used for one time passwords; the format of
|
|
|
|
|
# the file is described in https://github.com/archiecobbs/mod-authn-otp/wiki/UsersFile
|
|
|
|
|
#
|
|
|
|
|
# radius[config=/etc/radiusclient/radiusclient.conf,groupconfig=true,nas-identifier=name]:
|
|
|
|
|
# The radius option requires specifying freeradius-client configuration
|
|
|
|
|
# file. If the groupconfig option is set, then config-per-user/group will be overridden,
|
|
|
|
|
# and all configuration will be read from radius. That also includes the
|
|
|
|
|
# Acct-Interim-Interval, and Session-Timeout values.
|
|
|
|
|
#
|
|
|
|
|
# See doc/README-radius.md for the supported radius configuration atributes.
|
|
|
|
|
#
|
|
|
|
|
# gssapi[keytab=/etc/key.tab,require-local-user-map=true,tgt-freshness-time=900]
|
|
|
|
|
# The gssapi option allows one to use authentication methods supported by GSSAPI,
|
|
|
|
|
# such as Kerberos tickets with ocserv. It should be best used as an alternative
|
|
|
|
|
# to PAM (i.e., have pam in auth and gssapi in enable-auth), to allow users with
|
|
|
|
|
# tickets and without tickets to login. The default value for require-local-user-map
|
|
|
|
|
# is true. The 'tgt-freshness-time' if set, it would require the TGT tickets presented
|
|
|
|
|
# to have been issued within the provided number of seconds. That option is used to
|
|
|
|
|
# restrict logins even if the KDC provides long time TGT tickets.
|
|
|
|
|
|
|
|
|
|
#auth = "pam"
|
|
|
|
|
#auth = "pam[gid-min=1000]"
|
|
|
|
|
#auth = "plain[passwd=/etc/ocserv/ocpasswd,otp=./sample.otp]"
|
|
|
|
|
auth = "plain[passwd=/etc/ocserv/ocpasswd]"
|
|
|
|
|
#auth = "certificate"
|
|
|
|
|
#auth = "radius[config=/etc/radiusclient/radiusclient.conf,groupconfig=true]"
|
|
|
|
|
|
|
|
|
|
# Specify alternative authentication methods that are sufficient
|
|
|
|
|
# for authentication. That is, if set, any of the methods enabled
|
|
|
|
|
# will be sufficient to login, irrespective of the main 'auth' entries.
|
|
|
|
|
# When multiple options are present, they are OR composed (any of them
|
|
|
|
|
# succeeding allows login).
|
|
|
|
|
enable-auth = "certificate"
|
|
|
|
|
#enable-auth = "gssapi"
|
|
|
|
|
#enable-auth = "gssapi[keytab=/etc/key.tab,require-local-user-map=true,tgt-freshness-time=900]"
|
|
|
|
|
|
|
|
|
|
# Accounting methods available:
|
|
|
|
|
# radius: can be combined with any authentication method, it provides
|
|
|
|
|
# radius accounting to available users (see also stats-report-time).
|
|
|
|
|
#
|
|
|
|
|
# pam: can be combined with any authentication method, it provides
|
|
|
|
|
# a validation of the connecting user's name using PAM. It is
|
|
|
|
|
# superfluous to use this method when authentication is already
|
|
|
|
|
# PAM.
|
|
|
|
|
#
|
|
|
|
|
# Only one accounting method can be specified.
|
|
|
|
|
#acct = "radius[config=/etc/radiusclient/radiusclient.conf]"
|
|
|
|
|
|
|
|
|
|
# Use listen-host to limit to specific IPs or to the IPs of a provided
|
|
|
|
|
# hostname.
|
|
|
|
|
#listen-host = [IP|HOSTNAME]
|
|
|
|
|
|
|
|
|
|
# Use udp-listen-host to limit udp to specific IPs or to the IPs of a provided
|
|
|
|
|
# hostname. if not set, listen-host will be used
|
|
|
|
|
#udp-listen-host = [IP|HOSTNAME]
|
|
|
|
|
|
|
|
|
|
# When the server has a dynamic DNS address (that may change),
|
|
|
|
|
# should set that to true to ask the client to resolve again on
|
|
|
|
|
# reconnects.
|
|
|
|
|
#listen-host-is-dyndns = true
|
|
|
|
|
|
|
|
|
|
# move the listen socket within the specified network namespace
|
|
|
|
|
# listen-netns = "foo"
|
|
|
|
|
|
|
|
|
|
# TCP and UDP port number
|
|
|
|
|
tcp-port = 443
|
|
|
|
|
udp-port = 443
|
|
|
|
|
|
|
|
|
|
# The user the worker processes will be run as. This should be a dedicated
|
|
|
|
|
# unprivileged user (e.g., 'ocserv') and no other services should run as this
|
|
|
|
|
# user.
|
|
|
|
|
run-as-user = nobody
|
|
|
|
|
run-as-group = daemon
|
|
|
|
|
|
|
|
|
|
# socket file used for IPC with occtl. You only need to set that,
|
|
|
|
|
# if you use more than a single servers.
|
|
|
|
|
#occtl-socket-file = /var/run/occtl.socket
|
|
|
|
|
|
|
|
|
|
# socket file used for server IPC (worker-main), will be appended with .PID
|
|
|
|
|
# It must be accessible within the chroot environment (if any), so it is best
|
|
|
|
|
# specified relatively to the chroot directory.
|
|
|
|
|
socket-file = /var/run/ocserv-socket
|
|
|
|
|
|
|
|
|
|
# The default server directory. Does not require any devices present.
|
|
|
|
|
#chroot-dir = /var/lib/ocserv
|
|
|
|
|
|
|
|
|
|
# The key and the certificates of the server
|
|
|
|
|
# The key may be a file, or any URL supported by GnuTLS (e.g.,
|
|
|
|
|
# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user
|
|
|
|
|
# or pkcs11:object=my-vpn-key;object-type=private)
|
|
|
|
|
#
|
|
|
|
|
# The server-cert file may contain a single certificate, or
|
|
|
|
|
# a sorted certificate chain.
|
|
|
|
|
# There may be multiple server-cert and server-key directives,
|
|
|
|
|
# but each key should correspond to the preceding certificate.
|
|
|
|
|
# The certificate files will be reloaded when changed allowing for in-place
|
|
|
|
|
# certificate renewal (they are checked and reloaded periodically;
|
|
|
|
|
# a SIGHUP signal to main server will force reload).
|
|
|
|
|
|
|
|
|
|
#server-cert = /etc/ocserv/server-cert.pem
|
|
|
|
|
#server-key = /etc/ocserv/server-key.pem
|
|
|
|
|
server-cert = /etc/ocserv/ssl/ioiox.cer
|
|
|
|
|
server-key = /etc/ocserv/ssl/ioiox.key
|
|
|
|
|
|
|
|
|
|
# Diffie-Hellman parameters. Only needed if for old (pre 3.6.0
|
|
|
|
|
# versions of GnuTLS for supporting DHE ciphersuites.
|
|
|
|
|
# Can be generated using:
|
|
|
|
|
# certtool --generate-dh-params --outfile /etc/ocserv/dh.pem
|
|
|
|
|
#dh-params = /etc/ocserv/dh.pem
|
|
|
|
|
|
|
|
|
|
# In case PKCS #11, TPM or encrypted keys are used the PINs should be available
|
|
|
|
|
# in files. The srk-pin-file is applicable to TPM keys only, and is the
|
|
|
|
|
# storage root key.
|
|
|
|
|
#pin-file = /etc/ocserv/pin.txt
|
|
|
|
|
#srk-pin-file = /etc/ocserv/srkpin.txt
|
|
|
|
|
|
|
|
|
|
# The password or PIN needed to unlock the key in server-key file.
|
|
|
|
|
# Only needed if the file is encrypted or a PKCS #11 object. This
|
|
|
|
|
# is an alternative method to pin-file.
|
|
|
|
|
#key-pin = 1234
|
|
|
|
|
|
|
|
|
|
# The SRK PIN for TPM.
|
|
|
|
|
# This is an alternative method to srk-pin-file.
|
|
|
|
|
#srk-pin = 1234
|
|
|
|
|
|
|
|
|
|
# The Certificate Authority that will be used to verify
|
|
|
|
|
# client certificates (public keys) if certificate authentication
|
|
|
|
|
# is set.
|
|
|
|
|
#ca-cert = /etc/ocserv/ca.pem
|
|
|
|
|
ca-cert = /etc/ocserv/ssl/ca.cert.pem
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
### All configuration options below this line are reloaded on a SIGHUP.
|
|
|
|
|
### The options above, will remain unchanged. Note however, that the
|
|
|
|
|
### server-cert, server-key, dh-params and ca-cert options will be reloaded
|
|
|
|
|
### if the provided file changes, on server reload. That allows certificate
|
|
|
|
|
### rotation, but requires the server key to remain the same for seamless
|
|
|
|
|
### operation. If the server key changes on reload, there may be connection
|
|
|
|
|
### failures during the reloading time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Whether to enable seccomp/Linux namespaces worker isolation. That restricts the number of
|
|
|
|
|
# system calls allowed to a worker process, in order to reduce damage from a
|
|
|
|
|
# bug in the worker process. It is available on Linux systems at a performance cost.
|
|
|
|
|
# The performance cost is roughly 2% overhead at transfer time (tested on a Linux 3.17.8).
|
|
|
|
|
# Note however, that process isolation is restricted to the specific libc versions
|
|
|
|
|
# the isolation was tested at. If you get random failures on worker processes, try
|
|
|
|
|
# disabling that option and report the failures you, along with system and debugging
|
|
|
|
|
# information at: https://gitlab.com/ocserv/ocserv/issues
|
|
|
|
|
#isolate-workers = true
|
|
|
|
|
|
|
|
|
|
# A banner to be displayed on clients after connection
|
|
|
|
|
#banner = "Welcome"
|
|
|
|
|
|
|
|
|
|
# A banner to be displayed on clients before connection
|
|
|
|
|
#pre-login-banner = "Welcome"
|
|
|
|
|
|
|
|
|
|
# Limit the number of clients. Unset or set to zero for unlimited.
|
|
|
|
|
#max-clients = 1024
|
|
|
|
|
max-clients = 16
|
|
|
|
|
|
|
|
|
|
# Limit the number of identical clients (i.e., users connecting
|
|
|
|
|
# multiple times). Unset or set to zero for unlimited.
|
|
|
|
|
max-same-clients = 10
|
|
|
|
|
|
|
|
|
|
# When the server receives connections from a proxy, like haproxy
|
|
|
|
|
# which supports the proxy protocol, set this to obtain the correct
|
|
|
|
|
# client addresses. The proxy protocol would then be expected in
|
|
|
|
|
# the TCP or UNIX socket (not the UDP one). Although both v1
|
|
|
|
|
# and v2 versions of proxy protocol are supported, the v2 version
|
|
|
|
|
# is recommended as it is more efficient in parsing.
|
|
|
|
|
#listen-proxy-proto = true
|
|
|
|
|
|
|
|
|
|
# Rate limit the number of incoming connections to one every X milliseconds
|
|
|
|
|
# (X is the provided value), as the secmod backlog grows. This
|
|
|
|
|
# makes the server more resilient (and prevents connection failures) on
|
|
|
|
|
# multiple concurrent connections. Set to zero for no limit.
|
|
|
|
|
rate-limit-ms = 100
|
|
|
|
|
|
|
|
|
|
# Stats report time. The number of seconds after which each
|
|
|
|
|
# worker process will report its usage statistics (number of
|
|
|
|
|
# bytes transferred etc). This is useful when accounting like
|
|
|
|
|
# radius is in use.
|
|
|
|
|
#stats-report-time = 360
|
|
|
|
|
|
|
|
|
|
# Stats reset time. The period of time statistics kept by main/sec-mod
|
|
|
|
|
# processes will be reset. These are the statistics shown by cmd
|
|
|
|
|
# 'occtl show stats'. For daily: 86400, weekly: 604800
|
|
|
|
|
# This is unrelated to stats-report-time.
|
|
|
|
|
server-stats-reset-time = 604800
|
|
|
|
|
|
|
|
|
|
# Keepalive in seconds
|
|
|
|
|
keepalive = 32400
|
|
|
|
|
|
|
|
|
|
# Dead peer detection in seconds.
|
|
|
|
|
# Note that when the client is behind a NAT this value
|
|
|
|
|
# needs to be short enough to prevent the NAT disassociating
|
|
|
|
|
# his UDP session from the port number. Otherwise the client
|
|
|
|
|
# could have his UDP connection stalled, for several minutes.
|
|
|
|
|
dpd = 90
|
|
|
|
|
|
|
|
|
|
# Dead peer detection for mobile clients. That needs to
|
|
|
|
|
# be higher to prevent such clients being awaken too
|
|
|
|
|
# often by the DPD messages, and save battery.
|
|
|
|
|
# The mobile clients are distinguished from the header
|
|
|
|
|
# 'X-AnyConnect-Identifier-Platform'.
|
|
|
|
|
mobile-dpd = 1800
|
|
|
|
|
|
|
|
|
|
# If using DTLS, and no UDP traffic is received for this
|
|
|
|
|
# many seconds, attempt to send future traffic over the TCP
|
|
|
|
|
# connection instead, in an attempt to wake up the client
|
|
|
|
|
# in the case that there is a NAT and the UDP translation
|
|
|
|
|
# was deleted. If this is unset, do not attempt to use this
|
|
|
|
|
# recovery mechanism.
|
|
|
|
|
switch-to-tcp-timeout = 25
|
|
|
|
|
|
|
|
|
|
# MTU discovery (DPD must be enabled)
|
|
|
|
|
try-mtu-discovery = false
|
|
|
|
|
|
|
|
|
|
# To enable load-balancer connection draining, set server-drain-ms to a value
|
|
|
|
|
# higher than your load-balancer health probe interval.
|
|
|
|
|
#server-drain-ms = 15000
|
|
|
|
|
|
|
|
|
|
# If you have a certificate from a CA that provides an OCSP
|
|
|
|
|
# service you may provide a fresh OCSP status response within
|
|
|
|
|
# the TLS handshake. That will prevent the client from connecting
|
|
|
|
|
# independently on the OCSP server.
|
|
|
|
|
# You can update this response periodically using:
|
|
|
|
|
# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response
|
|
|
|
|
# Make sure that you replace the following file in an atomic way.
|
|
|
|
|
#ocsp-response = /etc/ocserv/ocsp.der
|
|
|
|
|
|
|
|
|
|
# The object identifier that will be used to read the user ID in the client
|
|
|
|
|
# certificate. The object identifier should be part of the certificate's DN
|
|
|
|
|
# Useful OIDs are:
|
|
|
|
|
# CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1, SAN(rfc822name)
|
|
|
|
|
# cert-user-oid = 0.9.2342.19200300.100.1.1
|
|
|
|
|
cert-user-oid = 2.5.4.3
|
|
|
|
|
|
|
|
|
|
# The object identifier that will be used to read the user group in the
|
|
|
|
|
# client certificate. The object identifier should be part of the certificate's
|
|
|
|
|
# DN. If the user may belong to multiple groups, then use multiple such fields
|
|
|
|
|
# in the certificate's DN. Useful OIDs are:
|
|
|
|
|
# OU (organizational unit) = 2.5.4.11
|
|
|
|
|
#cert-group-oid = 2.5.4.11
|
|
|
|
|
|
|
|
|
|
# The revocation list of the certificates issued by the 'ca-cert' above.
|
|
|
|
|
# See the manual to generate an empty CRL initially. The CRL will be reloaded
|
|
|
|
|
# periodically when ocserv detects a change in the file. To force a reload use
|
|
|
|
|
# SIGHUP.
|
|
|
|
|
#crl = /etc/ocserv/crl.pem
|
|
|
|
|
|
|
|
|
|
# Uncomment this to enable compression negotiation (LZS, LZ4).
|
|
|
|
|
compression = true
|
|
|
|
|
|
|
|
|
|
# Set the minimum size under which a packet will not be compressed.
|
|
|
|
|
# That is to allow low-latency for VoIP packets. The default size
|
|
|
|
|
# is 256 bytes. Modify it if the clients typically use compression
|
|
|
|
|
# as well of VoIP with codecs that exceed the default value.
|
|
|
|
|
#no-compress-limit = 256
|
|
|
|
|
|
|
|
|
|
# GnuTLS priority string; note that SSL 3.0 is disabled by default
|
|
|
|
|
# as there are no openconnect (and possibly anyconnect clients) using
|
|
|
|
|
# that protocol. The string below does not enforce perfect forward
|
|
|
|
|
# secrecy, in order to be compatible with legacy clients.
|
|
|
|
|
#
|
|
|
|
|
# Note that the most performant ciphersuites are the moment are the ones
|
|
|
|
|
# involving AES-GCM. These are very fast in x86 and x86-64 hardware, and
|
|
|
|
|
# in addition require no padding, thus taking full advantage of the MTU.
|
|
|
|
|
# For that to be taken advantage of, the openconnect client must be
|
|
|
|
|
# used, and the server must be compiled against GnuTLS 3.2.7 or later.
|
|
|
|
|
# Use "gnutls-cli --benchmark-tls-ciphers", to see the performance
|
|
|
|
|
# difference with AES_128_CBC_SHA1 (the default for anyconnect clients)
|
|
|
|
|
# in your system.
|
|
|
|
|
|
|
|
|
|
tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0:-VERS-TLS1.0:-VERS-TLS1.1"
|
|
|
|
|
|
|
|
|
|
# More combinations in priority strings are available, check
|
|
|
|
|
# http://gnutls.org/manual/html_node/Priority-Strings.html
|
|
|
|
|
# E.g., the string below enforces perfect forward secrecy (PFS)
|
|
|
|
|
# on the main channel.
|
|
|
|
|
#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-RSA:-VERS-SSL3.0:-ARCFOUR-128"
|
|
|
|
|
|
|
|
|
|
# That option requires the established DTLS channel to use the same
|
|
|
|
|
# cipher as the primary TLS channel. This cannot be combined with
|
|
|
|
|
# listen-clear-file since the ciphersuite information is not available
|
|
|
|
|
# in that configuration. Note also, that this option implies that
|
|
|
|
|
# dtls-legacy option is false; this option cannot be enforced
|
|
|
|
|
# in the legacy/compat protocol.
|
|
|
|
|
#match-tls-dtls-ciphers = true
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that a client is allowed to stay connected prior
|
|
|
|
|
# to authentication
|
|
|
|
|
auth-timeout = 240
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that a client is allowed to stay idle (no traffic)
|
|
|
|
|
# before being disconnected. Unset to disable.
|
|
|
|
|
#idle-timeout = 1200
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that a client is allowed to stay connected
|
|
|
|
|
# Unset to disable. When set a client will be disconnected after being
|
|
|
|
|
# continuously connected for this amount of time, and its cookies will
|
|
|
|
|
# be invalidated (i.e., re-authentication will be required).
|
|
|
|
|
#session-timeout = 86400
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that a mobile client is allowed to stay idle (no
|
|
|
|
|
# traffic) before being disconnected. Unset to disable.
|
|
|
|
|
#mobile-idle-timeout = 2400
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that a client is not allowed to reconnect after
|
|
|
|
|
# a failed authentication attempt.
|
|
|
|
|
min-reauth-time = 300
|
|
|
|
|
|
|
|
|
|
# Banning clients in ocserv works with a point system. IP addresses
|
|
|
|
|
# that get a score over that configured number are banned for
|
|
|
|
|
# min-reauth-time seconds. By default a wrong password attempt is 10 points,
|
|
|
|
|
# a KKDCP POST is 1 point, and a connection is 1 point. Note that
|
|
|
|
|
# due to difference processes being involved the count of points
|
|
|
|
|
# will not be real-time precise.
|
|
|
|
|
#
|
|
|
|
|
# Score banning cannot be reliably used when receiving proxied connections
|
|
|
|
|
# locally from an HTTP server (i.e., when listen-clear-file is used).
|
|
|
|
|
#
|
|
|
|
|
# Set to zero to disable.
|
|
|
|
|
max-ban-score = 80
|
|
|
|
|
|
|
|
|
|
# The time (in seconds) that all score kept for a client is reset.
|
|
|
|
|
ban-reset-time = 1200
|
|
|
|
|
|
|
|
|
|
# In case you'd like to change the default points.
|
|
|
|
|
#ban-points-wrong-password = 10
|
|
|
|
|
#ban-points-connection = 1
|
|
|
|
|
#ban-points-kkdcp = 1
|
|
|
|
|
|
|
|
|
|
# Cookie timeout (in seconds)
|
|
|
|
|
# Once a client is authenticated he's provided a cookie with
|
|
|
|
|
# which he can reconnect. That cookie will be invalidated if not
|
|
|
|
|
# used within this timeout value. This cookie remains valid, during
|
|
|
|
|
# the user's connected time, and after user disconnection it
|
|
|
|
|
# remains active for this amount of time. That setting should allow a
|
|
|
|
|
# reasonable amount of time for roaming between different networks.
|
|
|
|
|
cookie-timeout = 3600
|
|
|
|
|
|
|
|
|
|
# If this is enabled (not recommended) the cookies will stay
|
|
|
|
|
# valid even after a user manually disconnects, and until they
|
|
|
|
|
# expire. This may improve roaming with some broken clients.
|
|
|
|
|
#persistent-cookies = true
|
|
|
|
|
|
|
|
|
|
# Whether roaming is allowed, i.e., if true a cookie is
|
|
|
|
|
# restricted to a single IP address and cannot be re-used
|
|
|
|
|
# from a different IP.
|
|
|
|
|
deny-roaming = false
|
|
|
|
|
|
|
|
|
|
# ReKey time (in seconds)
|
|
|
|
|
# ocserv will ask the client to refresh keys periodically once
|
|
|
|
|
# this amount of seconds is elapsed. Set to zero to disable (note
|
|
|
|
|
# that, some clients fail if rekey is disabled).
|
|
|
|
|
rekey-time = 172800
|
|
|
|
|
|
|
|
|
|
# ReKey method
|
|
|
|
|
# Valid options: ssl, new-tunnel
|
|
|
|
|
# ssl: Will perform an efficient rehandshake on the channel allowing
|
|
|
|
|
# a seamless connection during rekey.
|
|
|
|
|
# new-tunnel: Will instruct the client to discard and re-establish the channel.
|
|
|
|
|
# Use this option only if the connecting clients have issues with the ssl
|
|
|
|
|
# option.
|
|
|
|
|
rekey-method = ssl
|
|
|
|
|
|
|
|
|
|
# Script to call when a client connects and obtains an IP.
|
|
|
|
|
# The following parameters are passed on the environment.
|
|
|
|
|
# REASON, VHOST, USERNAME, GROUPNAME, DEVICE, IP_REAL (the real IP of the client),
|
|
|
|
|
# REMOTE_HOSTNAME (the remotely advertised hostname), IP_REAL_LOCAL
|
|
|
|
|
# (the local interface IP the client connected), IP_LOCAL
|
|
|
|
|
# (the local IP in the P-t-P connection), IP_REMOTE (the VPN IP of the client),
|
|
|
|
|
# IPV6_LOCAL (the IPv6 local address if there are both IPv4 and IPv6
|
|
|
|
|
# assigned), IPV6_REMOTE (the IPv6 remote address), IPV6_PREFIX, and
|
|
|
|
|
# ID (a unique numeric ID); REASON may be "connect" or "disconnect".
|
|
|
|
|
# In addition the following variables OCSERV_ROUTES (the applied routes for this
|
|
|
|
|
# client), OCSERV_NO_ROUTES, OCSERV_DNS (the DNS servers for this client),
|
|
|
|
|
# will contain a space separated list of routes or DNS servers. A version
|
|
|
|
|
# of these variables with the 4 or 6 suffix will contain only the IPv4 or
|
|
|
|
|
# IPv6 values. The connect script must return zero as exit code, or the
|
|
|
|
|
# client connection will be refused.
|
|
|
|
|
|
|
|
|
|
# The disconnect script will receive the additional values: STATS_BYTES_IN,
|
|
|
|
|
# STATS_BYTES_OUT, STATS_DURATION that contain a 64-bit counter of the bytes
|
|
|
|
|
# output from the tun device, and the duration of the session in seconds.
|
|
|
|
|
|
|
|
|
|
#connect-script = /usr/bin/myscript
|
|
|
|
|
#disconnect-script = /usr/bin/myscript
|
|
|
|
|
|
|
|
|
|
# This script is to be called when the client's advertised hostname becomes
|
|
|
|
|
# available. It will contain REASON with "host-update" value and the
|
|
|
|
|
# variable REMOTE_HOSTNAME in addition to the connect variables.
|
|
|
|
|
|
|
|
|
|
#host-update-script = /usr/bin/myhostnamescript
|
|
|
|
|
|
|
|
|
|
# UTMP
|
|
|
|
|
# Register the connected clients to utmp. This will allow viewing
|
|
|
|
|
# the connected clients using the command 'who'.
|
|
|
|
|
#use-utmp = true
|
|
|
|
|
|
|
|
|
|
# Whether to enable support for the occtl tool (i.e., either through D-BUS,
|
|
|
|
|
# or via a unix socket).
|
|
|
|
|
use-occtl = true
|
|
|
|
|
|
|
|
|
|
# PID file. It can be overridden in the command line.
|
|
|
|
|
pid-file = /var/run/ocserv.pid
|
|
|
|
|
|
|
|
|
|
# Set the protocol-defined priority (SO_PRIORITY) for packets to
|
|
|
|
|
# be sent. That is a number from 0 to 6 with 0 being the lowest
|
|
|
|
|
# priority. Alternatively this can be used to set the IP Type-
|
|
|
|
|
# Of-Service, by setting it to a hexadecimal number (e.g., 0x20).
|
|
|
|
|
# This can be set per user/group or globally.
|
|
|
|
|
#net-priority = 3
|
|
|
|
|
|
|
|
|
|
# Set the VPN worker process into a specific cgroup. This is Linux
|
|
|
|
|
# specific and can be set per user/group or globally.
|
|
|
|
|
#cgroup = "cpuset,cpu:test"
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Network settings
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
# The name to use for the tun device
|
|
|
|
|
device = vpns
|
|
|
|
|
|
|
|
|
|
# Whether the generated IPs will be predictable, i.e., IP stays the
|
|
|
|
|
# same for the same user when possible.
|
|
|
|
|
predictable-ips = true
|
|
|
|
|
|
|
|
|
|
# The default domain to be advertised. Multiple domains (functional on
|
|
|
|
|
# openconnect clients) can be provided in a space separated list.
|
|
|
|
|
default-domain = example.com
|
|
|
|
|
#default-domain = "example.com one.example.com"
|
|
|
|
|
|
|
|
|
|
# The pool of addresses that leases will be given from. If the leases
|
|
|
|
|
# are given via Radius, or via the explicit-ip? per-user config option then
|
|
|
|
|
# these network values should contain a network with at least a single
|
|
|
|
|
# address that will remain under the full control of ocserv (that is
|
|
|
|
|
# to be able to assign the local part of the tun device address).
|
|
|
|
|
# Note that, you could use addresses from a subnet of your LAN network if you
|
|
|
|
|
# enable [proxy arp in the LAN interface](http://ocserv.gitlab.io/www/recipes-ocserv-pseudo-bridge.html);
|
|
|
|
|
# in that case it is recommended to set ping-leases to true.
|
|
|
|
|
ipv4-network = 192.168.10.0
|
|
|
|
|
ipv4-netmask = 255.255.255.0
|
|
|
|
|
|
|
|
|
|
# An alternative way of specifying the network:
|
|
|
|
|
#ipv4-network = 192.168.1.0/24
|
|
|
|
|
|
|
|
|
|
# The IPv6 subnet that leases will be given from.
|
|
|
|
|
#ipv6-network = fda9:4efe:7e3b:03ea::/48
|
|
|
|
|
|
|
|
|
|
# Specify the size of the network to provide to clients. It is
|
|
|
|
|
# generally recommended to provide clients with a /64 network in
|
|
|
|
|
# IPv6, but any subnet may be specified. To provide clients only
|
|
|
|
|
# with a single IP use the prefix 128.
|
|
|
|
|
#ipv6-subnet-prefix = 128
|
|
|
|
|
#ipv6-subnet-prefix = 64
|
|
|
|
|
|
|
|
|
|
# Whether to tunnel all DNS queries via the VPN. This is the default
|
|
|
|
|
# when a default route is set.
|
|
|
|
|
#tunnel-all-dns = true
|
|
|
|
|
|
|
|
|
|
# The advertized DNS server. Use multiple lines for
|
|
|
|
|
# multiple servers.
|
|
|
|
|
# dns = fc00::4be0
|
|
|
|
|
dns = 192.168.1.3
|
|
|
|
|
|
|
|
|
|
# The NBNS server (if any)
|
|
|
|
|
#nbns = 192.168.1.3
|
|
|
|
|
|
|
|
|
|
# The domains over which the provided DNS should be used. Use
|
|
|
|
|
# multiple lines for multiple domains.
|
|
|
|
|
#split-dns = example.com
|
|
|
|
|
|
|
|
|
|
# Prior to leasing any IP from the pool ping it to verify that
|
|
|
|
|
# it is not in use by another (unrelated to this server) host.
|
|
|
|
|
# Only set to true, if there can be occupied addresses in the
|
|
|
|
|
# IP range for leases.
|
|
|
|
|
ping-leases = false
|
|
|
|
|
|
|
|
|
|
# Use this option to set a link MTU value to the incoming
|
|
|
|
|
# connections. Unset to use the default MTU of the TUN device.
|
|
|
|
|
# Note that the MTU is negotiated using the value set and the
|
|
|
|
|
# value sent by the peer.
|
|
|
|
|
#mtu = 1420
|
|
|
|
|
|
|
|
|
|
# Unset to enable bandwidth restrictions (in bytes/sec). The
|
|
|
|
|
# setting here is global, but can also be set per user or per group.
|
|
|
|
|
#rx-data-per-sec = 40000
|
|
|
|
|
#tx-data-per-sec = 40000
|
|
|
|
|
|
|
|
|
|
# The number of packets (of MTU size) that are available in
|
|
|
|
|
# the output buffer. The default is low to improve latency.
|
|
|
|
|
# Setting it higher will improve throughput.
|
|
|
|
|
#output-buffer = 10
|
|
|
|
|
|
|
|
|
|
# Routes to be forwarded to the client. If you need the
|
|
|
|
|
# client to forward routes to the server, you may use the
|
|
|
|
|
# config-per-user/group or even connect and disconnect scripts.
|
|
|
|
|
#
|
|
|
|
|
# To set the server as the default gateway for the client just
|
|
|
|
|
# comment out all routes from the server, or use the special keyword
|
|
|
|
|
# 'default'.
|
|
|
|
|
|
|
|
|
|
#route = 10.10.10.0/255.255.255.0
|
|
|
|
|
#route = 192.168.0.0/255.255.0.0
|
|
|
|
|
#route = fef4:db8:1000:1001::/64
|
|
|
|
|
#route = default
|
|
|
|
|
|
|
|
|
|
# Subsets of the routes above that will not be routed by
|
|
|
|
|
# the server.
|
|
|
|
|
|
|
|
|
|
#no-route = 192.168.5.0/255.255.255.0
|
|
|
|
|
|
|
|
|
|
# Note the that following two firewalling options currently are available
|
|
|
|
|
# in Linux systems with iptables software.
|
|
|
|
|
|
|
|
|
|
# If set, the script /usr/bin/ocserv-fw will be called to restrict
|
|
|
|
|
# the user to its allowed routes and prevent him from accessing
|
|
|
|
|
# any other routes. In case of defaultroute, the no-routes are restricted.
|
|
|
|
|
# All the routes applied by ocserv can be reverted using /usr/bin/ocserv-fw
|
|
|
|
|
# --removeall. This option can be set globally or in the per-user configuration.
|
|
|
|
|
#restrict-user-to-routes = true
|
|
|
|
|
|
|
|
|
|
# This option implies restrict-user-to-routes set to true. If set, the
|
|
|
|
|
# script /usr/bin/ocserv-fw will be called to restrict the user to
|
|
|
|
|
# access specific ports in the network. This option can be set globally
|
|
|
|
|
# or in the per-user configuration.
|
|
|
|
|
#restrict-user-to-ports = "tcp(443), tcp(80), udp(443), sctp(99), tcp(583), icmp(), icmpv6()"
|
|
|
|
|
|
|
|
|
|
# You could also use negation, i.e., block the user from accessing these ports only.
|
|
|
|
|
#restrict-user-to-ports = "!(tcp(443), tcp(80))"
|
|
|
|
|
|
|
|
|
|
# When set to true, all client's iroutes are made visible to all
|
|
|
|
|
# connecting clients except for the ones offering them. This option
|
|
|
|
|
# only makes sense if config-per-user is set.
|
|
|
|
|
#expose-iroutes = true
|
|
|
|
|
|
|
|
|
|
# Groups that a client is allowed to select from.
|
|
|
|
|
# A client may belong in multiple groups, and in certain use-cases
|
|
|
|
|
# it is needed to switch between them. For these cases the client can
|
|
|
|
|
# select prior to authentication. Add multiple entries for multiple groups.
|
|
|
|
|
# The group may be followed by a user-friendly name in brackets.
|
|
|
|
|
#select-group = group1
|
|
|
|
|
#select-group = group2[My special group]
|
|
|
|
|
|
|
|
|
|
# The name of the (virtual) group that if selected it would assign the user
|
|
|
|
|
# to its default group.
|
|
|
|
|
#default-select-group = DEFAULT
|
|
|
|
|
|
|
|
|
|
# Instead of specifying manually all the allowed groups, you may instruct
|
|
|
|
|
# ocserv to scan all available groups and include the full list.
|
|
|
|
|
#auto-select-group = true
|
|
|
|
|
|
|
|
|
|
# Configuration files that will be applied per user connection or
|
|
|
|
|
# per group. Each file name on these directories must match the username
|
|
|
|
|
# or the groupname.
|
|
|
|
|
# The options allowed in the configuration files are dns, nbns,
|
|
|
|
|
# ipv?-network, ipv4-netmask, rx/tx-data-per-sec, iroute, route, no-route,
|
|
|
|
|
# explicit-ipv4, explicit-ipv6, net-priority, deny-roaming, no-udp,
|
|
|
|
|
# keepalive, dpd, mobile-dpd, max-same-clients, tunnel-all-dns,
|
|
|
|
|
# restrict-user-to-routes, cgroup, stats-report-time,
|
|
|
|
|
# mtu, idle-timeout, mobile-idle-timeout, restrict-user-to-ports,
|
|
|
|
|
# split-dns and session-timeout.
|
|
|
|
|
#
|
|
|
|
|
# Note that the 'iroute' option allows one to add routes on the server
|
|
|
|
|
# based on a user or group. The syntax depends on the input accepted
|
|
|
|
|
# by the commands route-add-cmd and route-del-cmd (see below). The no-udp
|
|
|
|
|
# is a boolean option (e.g., no-udp = true), and will prevent a UDP session
|
|
|
|
|
# for that specific user or group. The hostname option will set a
|
|
|
|
|
# hostname to override any proposed by the user. Note also, that, any
|
|
|
|
|
# routes, no-routes, DNS or NBNS servers present will overwrite the global ones.
|
|
|
|
|
|
|
|
|
|
#config-per-user = /etc/ocserv/config-per-user/
|
|
|
|
|
#config-per-group = /etc/ocserv/config-per-group/
|
|
|
|
|
|
|
|
|
|
# When config-per-xxx is specified and there is no group or user that
|
|
|
|
|
# matches, then utilize the following configuration.
|
|
|
|
|
#default-user-config = /etc/ocserv/defaults/user.conf
|
|
|
|
|
#default-group-config = /etc/ocserv/defaults/group.conf
|
|
|
|
|
|
|
|
|
|
# The system command to use to setup a route. %{R} will be replaced with the
|
|
|
|
|
# route/mask, %{RI} with the route in CIDR format, and %{D} with the (tun) device.
|
|
|
|
|
#
|
|
|
|
|
# The following example is from linux systems. %{R} should be something
|
|
|
|
|
# like 192.168.2.0/255.255.255.0 and %{RI} 192.168.2.0/24 (the argument of iroute).
|
|
|
|
|
|
|
|
|
|
#route-add-cmd = "ip route add %{R} dev %{D}"
|
|
|
|
|
#route-del-cmd = "ip route delete %{R} dev %{D}"
|
|
|
|
|
|
|
|
|
|
# This option allows one to forward a proxy. The special keywords '%{U}'
|
|
|
|
|
# and '%{G}', if present will be replaced by the username and group name.
|
|
|
|
|
#proxy-url = http://example.com/
|
|
|
|
|
#proxy-url = http://example.com/%{U}/
|
|
|
|
|
|
|
|
|
|
# This option allows you to specify a URL location where a client can
|
|
|
|
|
# post using MS-KKDCP, and the message will be forwarded to the provided
|
|
|
|
|
# KDC server. That is a translation URL between HTTP and Kerberos.
|
|
|
|
|
# In MIT kerberos you'll need to add in realms:
|
|
|
|
|
# EXAMPLE.COM = {
|
|
|
|
|
# kdc = https://ocserv.example.com/KdcProxy
|
|
|
|
|
# http_anchors = FILE:/etc/ocserv-ca.pem
|
|
|
|
|
# }
|
|
|
|
|
# In some distributions the krb5-k5tls plugin of kinit is required.
|
|
|
|
|
#
|
|
|
|
|
# The following option is available in ocserv, when compiled with GSSAPI support.
|
|
|
|
|
|
|
|
|
|
#kkdcp = "SERVER-PATH KERBEROS-REALM PROTOCOL@SERVER:PORT"
|
|
|
|
|
#kkdcp = "/KdcProxy KERBEROS.REALM udp@127.0.0.1:88"
|
|
|
|
|
#kkdcp = "/KdcProxy KERBEROS.REALM tcp@127.0.0.1:88"
|
|
|
|
|
#kkdcp = "/KdcProxy KERBEROS.REALM tcp@[::1]:88"
|
|
|
|
|
|
|
|
|
|
# Client profile xml. This can be used to advertise alternative servers
|
|
|
|
|
# to the client. A minimal file can be:
|
|
|
|
|
# <?xml version="1.0" encoding="UTF-8"?>
|
|
|
|
|
# <AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/encoding/ AnyConnectProfile.xsd">
|
|
|
|
|
# <ServerList>
|
|
|
|
|
# <HostEntry>
|
|
|
|
|
# <HostName>VPN Server name</HostName>
|
|
|
|
|
# <HostAddress>localhost</HostAddress>
|
|
|
|
|
# </HostEntry>
|
|
|
|
|
# </ServerList>
|
|
|
|
|
# </AnyConnectProfile>
|
|
|
|
|
#
|
|
|
|
|
# Other fields may be used by some of the CISCO clients.
|
|
|
|
|
# This file must be accessible from inside the worker's chroot.
|
|
|
|
|
# Note that:
|
|
|
|
|
# (1) enabling this option is not recommended as it will allow the
|
|
|
|
|
# worker processes to open arbitrary files (when isolate-workers is
|
|
|
|
|
# set to true).
|
|
|
|
|
# (2) This option cannot be set per-user or per-group; only the global
|
|
|
|
|
# version is being sent to client.
|
|
|
|
|
#user-profile = profile.xml
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# The following options are for (experimental) AnyConnect client
|
|
|
|
|
# compatibility.
|
|
|
|
|
|
|
|
|
|
# This option will enable the pre-draft-DTLS version of DTLS, and
|
|
|
|
|
# will not require clients to present their certificate on every TLS
|
|
|
|
|
# connection. It must be set to true to support legacy CISCO clients
|
|
|
|
|
# and openconnect clients < 7.08. When set to true, it implies dtls-legacy = true.
|
|
|
|
|
cisco-client-compat = true
|
|
|
|
|
|
|
|
|
|
# This option allows one to disable the DTLS-PSK negotiation (enabled by default).
|
|
|
|
|
# The DTLS-PSK negotiation was introduced in ocserv 0.11.5 to deprecate
|
|
|
|
|
# the pre-draft-DTLS negotiation inherited from AnyConnect. It allows the
|
|
|
|
|
# DTLS channel to negotiate its ciphers and the DTLS protocol version.
|
|
|
|
|
#dtls-psk = false
|
|
|
|
|
|
|
|
|
|
# This option allows one to disable the legacy DTLS negotiation (enabled by default,
|
|
|
|
|
# but that may change in the future).
|
|
|
|
|
# The legacy DTLS uses a pre-draft version of the DTLS protocol and was
|
|
|
|
|
# from AnyConnect protocol. It has several limitations, that are addressed
|
|
|
|
|
# by the dtls-psk protocol supported by openconnect 7.08+.
|
|
|
|
|
dtls-legacy = true
|
|
|
|
|
|
|
|
|
|
#Advanced options
|
|
|
|
|
|
|
|
|
|
# Option to allow sending arbitrary custom headers to the client after
|
|
|
|
|
# authentication and prior to VPN tunnel establishment. You shouldn't
|
|
|
|
|
# need to use this option normally; if you do and you think that
|
|
|
|
|
# this may help others, please send your settings and reason to
|
|
|
|
|
# the openconnect mailing list. The special keywords '%{U}'
|
|
|
|
|
# and '%{G}', if present will be replaced by the username and group name.
|
|
|
|
|
#custom-header = "X-My-Header: hi there"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# An example virtual host with different authentication methods serviced
|
|
|
|
|
# by this server.
|
|
|
|
|
|
|
|
|
|
# route=default
|
|
|
|
|
# route = 192.168.10.0/255.255.255.0
|
|
|
|
|
# no-route = 192.168.0.0/255.255.0.0
|
|
|
|
|
# no-route = 10.0.0.0/255.0.0.0
|
|
|
|
|
# no-route = 172.16.0.0/255.240.0.0
|
|
|
|
|
# no-route = 127.0.0.0/255.0.0.0
|
